worm gear speed reducer
Solitary reduction worm gearing provides high ratio reduction with few shifting parts in a close-coupled compact drive. The proper angle arrangement of driving-to-driven machine takes a the least space. Input and output shafts can be prolonged in either or both directions in horizontal or vertical arrangements adaptable to any mounting requirement. Efficient engine speeds are reduced to sluggish speed requirements of many industrial machines in one reduction.
Product Features
Ratios 5:1 to 70:1
Hollow & Solid Output Shafts
Vertical & Horizontal Mounting
Fan Cooled (Standard)
Motor Mounts (C-Face Adapters or Scoops)
Cast Iron or Metal Housings
Products
The exclusive use of the involute Helicoid Thread form (with departing side contact) on the worm and gear provides for high efficiencies, and long service existence. The hardened ground and polished alloy metal worm develops a easy, work hardened surface area on the bronze equipment. Because of this worm gears wear in and improve with extented service while additional gears are wearing out. Ever-Power offers a broad collection of model configurations, sizes, ratios, and add-ons from our standard product line.
Fabricated Designs
If your application involves serious shock loads or possible housing damage from external sources (as in steel mills or mobile apparatus applications) Ever-Power can provide fabricated steel housings with up to a 48″ center distances. Fabricated housings provide maximum rigidity and strength which allows the transmission of higher horsepower levels than are feasible with standard cast iron devices. Extra heavy side plates connect the worm and equipment shaft bearing facilitates, assuring proper meshing of the gear under all load circumstances. In smaller sizes, fabricated metal reducers are interchangeable with Ever-Power standard cast iron reducers.
Custom Designs
Ever-Power can provide custom acceleration and reversed engineered reducers for the application, be it a fresh project or a direct drop-in replacement for a competitor’s velocity reducer. Fabricated metal reducers allow Ever-Power to match a competitor’s footprint, centerline, and shaft elevation allowing a direct drop-in replacement saving the client time and money.
Long – Quiet Life
All worm gears in Ever-Power reducers are produced from phosphorous bronze. Our style also includes a hardened, surface and polished alloy metal worm. This combination develops a clean, work-hardened mating surface of the bronze gear which enhances with prolonged service.
Worm gearing is a class of equipment reducers that utilizes correct angle, nonintersecting shafts. This form of reducer provides soft and quiet operation and allows for the possibility of large quickness reductions. These gears can be found from share in a wide selection of ratios, from only 4:1 up to 3600:1. The small design and construction allows worm equipment reducers to be positioned in a comparatively small space. Thus, very high reductions in a restricted package size can be achieved with this configuration. Our worm gear features the constant sliding tooth action between worm and one’s teeth. This increases the tolerance for weighty loads and shock loads. Worm gear drives offer users high reducing convenience of relatively low cost in comparison with various other types of gearing.
The usage of worm gearing extends across many industries including food, beverage and grain and has many applications. Some applications that make use of worm gearing are: conveyors, mixers and bucket elevators.
Ever-Power worm gear reducer gearbox series bottom on years of experiences uses designed teeth surface with unsurpassed torque transfer performance with great performance, efficency and price.Worm gear program transmits power through sliding contact, resulting in extremely low vibration , noise, small backlash and self-locking property
-Housing:Onetime we casting creats great rigidity for severe impacts. Outer cooling fins and internal lubrication essential oil diversion channel design to increase heat dissipation.
-Worm Shaft: Manufactured with Carbon alloyed Steel S45C or SCM415, precison machined and carburized to HRC45 or HRC60, then for precision tooth grinding to make sure maximum contacting.
-Worm Wheel: Manufactured with Carbon alloy ALBC2, teeth are machined by precision CNC hobbing machine to sustain high impact.
A worm gear reducer is one type of reduction gear container which consists of a worm pinion insight, an output worm equipment, and includes a right angle output orientation. This kind of reduction gear package is normally used to take a rated motor speed and create a low speed output with higher torque worth based on the decrease ratio. They often can resolve space-saving problems since the worm gear reducer is among the sleekest decrease gearboxes available due to the small diameter of its result gear.
worm gear reducerWorm gear reducers are also a favorite type of acceleration reducer because they offer the greatest speed reduction in the tiniest package. With a high ratio of speed reduction and high torque output multiplier, it’s unsurprising that many power transmission systems utilize a worm gear reducer. Some of the most typical applications for worm gears can be found in tuning instruments, medical examining equipment, elevators, security gates, and conveyor belts.
SW-1 and SW-5
Torque Transmission provides two sizes of worm gear reducer, the SW-1 and the SW-5 and both are available in a range of ratios. The SW-1 ratios include 3.5:1 to 60:1 and the SW-5 ratios include 5:1 to 100:1. Both of these options are manufactured with durable compression-molded glass-fill up polyester housings for a durable, long lasting, light weight speed reducer that is also compact, noncorrosive, and nonmetallic.
Features
Our worm equipment reducers offer a choice of a solid or hollow output shaft and feature an adjustable mounting position. Both SW-1 and the SW-5, nevertheless, can endure shock loading better than other reduction gearbox designs, making them ideal for demanding applications.
Rugged compression-molded glass-fill polyester housing
Light-weight and compact
Non corrosive
Non metallic
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Grease Lubrication
Solid or Hollow output shaft
Adjustable mounting position
Worm Equipment Reducers also known as worm gearbox or worm rate reducers. Worm equipment reducers are utilized for speed reduction and increasing the torque for electric electric motor drives. You can choose to install your NEMA engine to the reducer utilizing the NEMA C face flange or make use of a coupling. If you need a coupling for the output or input shaft see our coupling section for selecting a coupling. We offer four assemblies left hand and right hand and double result shaft and shaft insight and shaft output. Interchangeable with the majority of worm gear manufactures. Find data sheet in product overview for diamensions. Unless you see your type, please Contact Us.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Style for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Inside and Outside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Steel Shafts
Flange Mount Models for 56C and 145TC Motors
Ever-Power DDVM series triple-reduction worm gear quickness reducers are available in ratios from 5000:1 to 175,000:1 and center distances from 7” to 20” (larger sizes on request). Output torque ranges from 33,000 in pounds. for the 7” CD DDVM-70 to 582,900 in pounds for the DDVM-200. Mechanical HP insight requirements are from 0.09 HP for the 175,000:1 7 in CD reducer to 6.25 HP for the 5000:1 20” CD unit. These reducers can be found in four configurations: horizontal, vertical, shafted, and shaft mounted.
These reducers are ideal for water/waste-water tools drive applications such as for example thickeners and clarifiers, which need a vertical down shaft. Other offered configurations also make Ever-Power triple reduction reducers perfect for make use of on mixers, elevators, solar panels, astronomical telescopes, indexing tables, hoists, conveyors, or additional process or components handling systems where large torques/gradual speeds are needed.
These reducers are also obtainable with a helical main reduction stage and are termed the HDVM series
Product Features
Ratios 5000:1 to 175,000:1
HP from 0.09 to 6.25.
Output Torque to 583,000 in lbs.
Output RPM as low as 0.01 with a 1750 RPM input.
Ideal for ultra-slow rate, high torque applications
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Design for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Inside and Outside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Metal Shafts
Flange Mount Models for 56C and 145TC Motors
Description
The HDR Series worm equipment reducers are used in low to moderate horsepower applications to reduce speeds and increase torque. Worm gear reducers are available in direct or indirect drive, direct drive models are 56C or 145TC flange install with either right, left or dual result shafts or a hollow bore result. The indirect drive versions are shaft input-shaft output boxes for make use of with sprocket or pulley drive systems. They provide an effective low cost solution to speed decrease and improved torque, with higher tolerances for shock loading than helical gear reducers.
In order to select a gearbox speed reducer, you will need to determine the mandatory torque and services factor for the application form. Click on “Specs” above for a table that will assist in determining the service factor. For service factors above 1.0, multiply the mandatory torque by the services factor.
Our standard 700 Series – the heart of Ever-Power velocity reducer products – has been serving industry reliably for over 40 years. Its verified modular design has set the market standard for functionality and is the most imitated item in today’s worm gear velocity reducer marketplace. But why accept a knock-off when you’re able to have the original – from Ever-Power.
Specifications
11 basic solitary reduction sizes
8 basic double reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow result shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow output bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in stock)
Product Features
The 700 Series’ huge oil reservoir provides efficient heat dissipation and lubrication for longer operating life.
Its multi-position mounting flexibility permits installation in practically any position.
Housings are straddle-milled, best and bottom level, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged casing, fabricated of fine-grained, gear-quality cast iron, provides optimum strength for maximum durability, and also greater precision during worm and gear alignment.
Ever-Power 700 Series high-strength bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel output shaft assures capacity for high torque and overhung loads.
Pipe plugs allow easy fill up, level, and drain in virtually any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal lifestyle.
Both 2D and 3D CAD drawings can be found in our eCatalog.
TheIncreased Quality! Industrial Rated! Inexpensive!One-piece gearcase, without external ribs, is made of close-grained cast iron and for rigid equipment and bearing support. In addition, it offers excellent high temperature dissipation.Dual lip, spring-loaded seals protect from oil leakage and stop dirt from entering.Stepped shafts with oversized ball andtapered roller bearings.Carbon steel shafts for greater power.High tensile strength cast bronze worm wheel and hardened and surface alloy steel worm made intregal with the shaft for lengthy and trouble-free life.Oil sight gauge for simple maintenance (not available on sizes 25 and 34).Factory oil stuffed.Every unit test run just before shipment.Universal mounting with bolt-on ft.Highly modifiable design.All this at substantially reduced prices than you have already been accustomed to spending money on reducers of lesser quality. Less

Any kind of staying concerns on worm gear speed reducer, discover more below.