Our worm gear reducers offer a choice of a solid or hollow output shaft and show an adjustable mounting placement. Both SW-1 and the SW-5, nevertheless, can endure shock loading much better than other reduction gearbox styles, making them well suited for demanding applications.
Rugged compression-molded glass-fill polyester housing
Light weight and compact
Non corrosive
Non metallic
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Grease Lubrication
Solid or Hollow output shaft
Adjustable mounting position
Worm Gear Speed Reducers is rated 5.0 out of 5 by 1.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Design for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Outside and inside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Steel Shafts
Flange Mount Versions for 56C and 145TC Motors
Our standard 700 Series – the heart of EP Gear’s swiftness reducer products – has been serving industry reliably for over 40 years. Its tested modular style has set the market standard for functionality and may be the most imitated product in today’s worm gear velocity reducer market. But why settle for a knock-off when you can have the initial – from EP Gear.
Specifications
11 basic one reduction sizes
8 basic double reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow output shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow output bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in share)
Product Features
The 700 Series’ huge oil reservoir provides efficient heat dissipation and lubrication for longer operating life.
Its multi-position mounting flexibility allows for installation in virtually any position.
Housings are straddle-milled, best and bottom level, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged housing, fabricated of fine-grained, gear-quality cast iron, provides maximum strength for optimum durability, as well as greater precision during worm and gear alignment.
EP Gear’s 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to increase thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel result shaft assures convenience of high torque and overhung loads.
Pipe plugs allow easy fill up, level, and drain in any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal lifestyle.
Both 2D and 3D CAD drawings can be found in our eCatalog.
GEARBOX REDUCERS
Correct angle gearboxes (worm and planetary) are tough and built for 90° turns. Inline reducers (parallel shaft and planetary) are an ideal match for motors with high insight speeds, or when gearmotor effectiveness is important. Get in touch with our technical sales personnel for help determining which gearbox solution is most beneficial for you.
RIGHT ANGLE REDUCERS
WORM GEAR REDUCER
EP’s worm gear reducers are designed with a hollow bore and invite for a corner turn with optional dual output. The reducers come in 12 ratios ranging from 5:1 to 100:1, with non-back-drivable ratios 30:1 and higher. Our correct angle gearboxes were created with five mounting options providing versatility when incorporating the reducer into item.
RIGHT ANGLE BEVEL GEARBOX
bevel-right-angle-gearbox
The right angle bevel gearbox combines the top features of our correct angle worm and planetary inline reducers. With a good and efficient correct angle configuration, our right angle planetary gearboxes offer a robust solution. The right angle bevel gearbox will come in 18 ratios ranging from 5:1 to 1000:1, and it is back-drivable at all ratios.
INLINE REDUCERS
I-SERIES PLANETARY GEARBOX
i-series-planetary-gearbox
Our I-Series little planetary gearbox configurations provide the smallest footprint and quietest procedure of our acceleration reducers. These gearboxes are made to deal with varying loads with small backlash. With frame sizes 52cm, 62cm, and 81cm, 12 ratios which range from 5:1 to 308:1, we’ve a solution to suit your needs. Our 52 frame size can be available with plastic-type material gears for noise-sensitive applications.
INLINE PLANETARY GEARBOX
inline-planetary-gearbox
Our inline planetary gearbox configurations supply the highest efficiency and best output torque of most our swiftness reducers. These gearboxes are made to handle varying loads with little backlash. Planetary gear reducers operate more quietly than parallel shaft reducers. With 18 ratio options ranging from 5:1 to 1000:1, we have a solution to suit your needs.
PARALLEL SHAFT GEARBOX
parallel-shaft-gearbox
Parallel shaft gearboxes are the best choice for constant duty applications. Their equipment cluster design provides an effective method for dissipating warmth. Parallel shaft gearboxes have the shortest length of our inline equipment reducer options therefore they work very well in conditions with limited space. Our parallel shaft gear reducers provide an affordable drop-in alternative solution for most small parallel shaft gearmotors.
Wormwheel gearboxes go by several names, including 90-degree gearboxes, right position gearboxes, swiftness reducers, worm gear reducers and worm drive gearboxes. Gear reduction boxes feature a gear arrangement when a gear in the kind of a screw, also referred to as a worm, meshes with a worm gear. These gears are usually made from bronze and the worms are steel or stainless steel.

While worm gears are similar to a spur equipment, the worm gearboxes are significantly smaller than other gear reduction boxes. A primary benefit of worm equipment reducers is definitely that they generate an output that is 90° from the insight and can be utilized to transmit higher torque or decrease rotational speed. Frequently, a worm gearbox has right hand threads; to change the path of the result, a left-hands thread worm gearbox is required.
Worldwide HdRS133-10/1-R Cast Iron Right Angle Worm Gear Reducer 10:1 Ratio

Discover a lot more write-ups regarding worm reduction gearbox by visit this site.