Our regular 700 Series – the heart of Ever-Power speed Worm Reducer reducer product line – has been serving industry reliably for over a decade. Its proven modular style has set the market standard for overall performance and is the most imitated product in the current worm gear speed reducer market. But why settle for a knock-off when you can have the initial – from Ever-Power.
Specifications
11 basic one reduction sizes
8 basic double reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow output shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow result bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in stock)
Product Features
The 700 Series’ large oil reservoir provides efficient heat dissipation and lubrication for longer operating existence.
Its multi-position mounting flexibility allows for installation in virtually any position.
Housings are straddle-milled, top and bottom, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged housing, fabricated of fine-grained, gear-quality cast iron, provides optimum strength for optimum durability, in addition to greater precision during worm and gear alignment.
Ever-Power 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to improve thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel result shaft assures capacity for high torque and overhung loads.
Pipe plugs allow easy fill, level, and drain in any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal life.
Both 2D and 3D CAD drawings can be found in our eCatalog.
Ever-Power worm gearboxes possess earned a popularity to be an industry benchmark worldwide. Our success came from our relentless drive for quality with state-of-the-art technology, all while offering worm gearboxes are affordable prices. High flexibility accorded through a wide choice of mounting options, shaft configurations and motor interfaces, makes the Ever-Power worm gearbox the default choice for the sector. The helical-worm and the double-worm edition, with or without the torque limiter, add up to the advantage, creating a highly versatile drive system.
Ever-Power Worm gearboxes provide high torque with low swiftness gear ratio. Being simple and compact in style, these gears can achieve higher gear ratio compared to the helical gears. These worm reduction gears having screw type characteristics are similar to helical gears, but its helix angle is typically comparatively larger) and its body is normally quite lengthy in the axial direction. The gears in these gearboxes can be correct or left-handed dependant on the purpose.
Mounting choice include universal housing, side flanges, foot (horizontal and vertical), shaft mounted with torque arm. Available in Solid shafts (solitary or dual), with torque arm or torque limiter.
Worm reduction gears features
Principles
A worm gear is a kind of interlocking gear composed of a worm shaft and worm wheel. The worm is shaped just like a screw and the worm wheel can be a type of gear machined to possess a tooth profile with the same configuration.
The procedure of a worm gear is comparable with that of a bolt and nut. The principle is equivalent to a nut that has been fixed so that it cannot rotate and therefore progresses in the axial direction when the bolt is usually turned.
The design of a worm gear is thought of through the relationship between the rack and spur gear on the center plane of the worm wheel.
Features
High reduction ratio One rotation of the worm rotates the worm wheel by one tooth. Because of this, in a 1 speed reduction gears, the wheel can be manufactured so that it will be rotated 1/60 (1/120 in unique applications).
Orthogonal shaft The shafts are aligned orthogonally because of the structure. This feature can help you layout the turning tranny direction at a right angle.
The arbitrariness of the rotation direction The screw direction of the worm could be clockwise or counterclockwise (generally clockwise). It is possible to change the rotation direction of the worm wheel by changing the screw direction.
A multitude of shaft layouts The wide variety of shaft layouts is one of the features of interlocking gears.For instance, right shaft output, remaining shaft output, dual shaft input and dual shaft output, etc., combine for a complete of 14 types (Body 2) and, if attachment orientations are included, you’ll be able to pick from over 40 layouts.
Low noise, low vibration The interlocking of the worm and worm wheel is definitely characteristic since the contact is usually linear and the relative slide is fantastic. In comparison with rolling power transmission, noise and vibration are extremely low. Because of this, this technology is utilized to drive medical apparatus, elevators and escalators, etc.
The principal specifications of worm reduction gears
MA Series(Small)
Center distance(mm) 32,40
Reduction ratio 10,20,30,40,50,60
Input capacity(kW) 0.1～1(at an input of 1800 rpm)
Output torque(N・m) 20～66
Input speed(rpm) 0～1800
MA Series(Medium)
Center distance(mm) 50,63,80,100,125,140,160
Reduction ratio 10,15,20,25,30,40,50,60
Input capacity(kW) 0.4～30(at an input of 1800 rpm)
Output torque(N・m) 900～3570
Input speed(rpm) 0～1800
S Series
Center distance(mm) 50,60,70,80,100,120,135,155,175,200,225,250,300,350,400,450,500
Reduction ratio 10,15,20,25,30,40,50,60
Input capacity(kW) 0.3～255(at an input of 1800 rpm)
Output torque(N・m) 50～56600
Input speed(rpm) 0～1800
Key points when choosing a worm reduction gears
Selection
When choosing a worm reduction gears, the procedures for selecting the right gear are described in the manufacturer catalogs and the series and models should be selected according to those procedures. Particular care should be taken in essential areas such as for example selecting the load index, calculating the overhang load and examining the heat rated capacity from the manufacturer.
Cautions during use
When utilizing a worm decrease gears, heat produced through the initial period of use is high and running-in operation at 1/4, 1/2 and 3/4 of rated torque for eight hour periods is key to sufficiently attaining the performance of the worm decrease gears.
Maintenance and inspection
After completing running-in procedure (approximately 50 hours), it’s important to improve the lubricating oil and to change the lubricating oil after that about 1 time per year according to the procedure manual offered by the manufacturer.
Product Description
The Worm Reduction Gear Box is provided by our company is of high-quality. Our products are created by using premium quality materials and enhance technology at our vendors end. These are widely used in a variety of sectors. Our items are easily available at an extremely low market prices.
Motor Mount Frame Options
TEC Motors, worm decrease gearbox.
Option A-160 B5 Framework, Flange Mount.
Choice B-132 B14 Frame, Face Mount.
Option C-100/112 B5 Frame, Flange Install.
High efficiency and secure operation. High load capability and overload functions. Output Torque = (Power (kW) x 9550 (Constant))/ Gearbox output speed (rpm).
Higher ratios on request dependent on service factor (40:1, 50:1, 60:1, 80:1, 100:1)
DESCRIPTION
Wormgears of the VF series are milestones for the industry worldwide. They succeeded in merging uncompromising quality with stateoftheart technology amd renown price effectiveness.Absolute versatility is given by the wide choice of several installation options, shaft configurations and engine interface, all offered as regular. The helicalworm and the doubleworm version, with or without the torque limiter, also accumulate, creating an extremely versatile drive system.
ADDITIONAL INFORMATION
AMP
0.42 A
EFFICIENCY
84%
HP
0.12
KW
0.09
RATIO
7
RPM
200
TEMPERATURE RATING
20 degree C TO 80 level C
TORQUE
4 Nm
HSN
8483.40.00
WARRANTY PERIOD
12 Months
The worm reduction gears come in two series: X and H.
The series X, featuring a worm and worm wheel set, is available in versions XA with shaft and XF-XC with mounting provisions for motor.
Version XF (bell housing + coupling) offers great versatility to match a broad range of applications and provides higher efficiency than the compact range XC, where the emphasis is on space performance.
Series H offers the same features because series X with an added plus: a spur gear pre-stage at the input end provides higher performance and a broader selection of ratios compared to the X series.
Body sizes 110 and 90 include a cast-iron casing cast enbloc, whereas smaller sizes make use of die-cast aluminium housings. The worm shaft is produced from casehardened and hardened alloy metal and ground-finished.
The worm wheel has a cast iron hub with cast bronze insert. Hollow result shaft is supplied as standard.
Broad range of possibilities:
second input, result flange, single or dual extension result shaft, torque limiter with through cable, torque arm.