Worm drive gearbox with motor
A robust worm-drive gearbox powered by an MM28 engine. Ideal applications where a simple to match, high torque result is required. Great for student based projects which includes robots and buggies.
The unit has been designed to ensure that the output shaft can be ‘clicked’ in and out for modification. Electronic.g. cutting down to size. The electric motor is snap installed into its cradle to activate the apparatus and worm.
Details
1 – 6V DC
0.1A to 1A based on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
Overall dimensions of box + engine: 35(W) x 40(H) x 60(L)mm
The primary feature of the high-efficiency gear box is a worm gear, which locks the output shaft whenever the electric motor isn’t turning. The high gear ratios of 216:1 or 336:1 make this gearbox appropriate for small strolling robots, lifting mechanisms, and various other applications where high torque is definitely desired.
The low-voltage motors in the worm gearbox operate on 1.5-4.5 volts and draw up to a few amps, making them perfect applicants for the DRV8833 motor driver carrier. Engine overheating can be due to excessive stalling, actually at suprisingly low voltages. We recommend that you use stall-detection sensors, or simply view your robot, to make sure that it doesn’t stall for more than a few seconds at the same time.
This gearbox includes a 4 mm diameter, round output shaft, which works together with the wheels that are compatible with Tamiya 4 mm, round shafts. Our 3 mm universal installation hub also suits on the smaller threaded end of the shaft, although it is not particularly intended to work with this kind of shaft (the hub’s set screw could harm the thread on the shaft).
Ever-Power gear motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical correct position worm geared motors arranged new specifications for reliability, effectiveness and economy with unparalleled features which includes hollow shafts in the smallest sizes. An inverter friendly design offers easy integration now and a really future proof answer. The Ever-Power gear engine offers total versatility in mounting choices includes shaft, base, encounter, and flange solutions. The engine terminal box could be mounted in substitute positions rotated in 90º steps around the motor frame offering for unparalleled integration possibilities.
Ever-Power gear motors comply with North American and International requirements, including NEMA, IEC, CSA, and CE, the Ever-Power series permits worldwide acceptance, a genuine total solution for our global customers.
Superior protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dirt tight and hose proof,and can be utilized outdoors or in wet and dusty conditions without the usage of additional enclosures. Full rated output is offered by the output shaft of the machine.
Product Features
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change initial after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Additional features:
Connecting with Connect connectors.
With built-in inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm gear motors are the option for applications requiring a part turn, optional dual result, or an inability for the electric motor to be back driven. The DC correct angle gear motors are designed for constant and intermittent duty procedure. Our right angle gear reducers were created with many mounting plate options, making them ideal for a number of DC electric motor based applications. You can expect 12 ratios ranging from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Regular brush life of 2000+ hours (varies by application)
EP Products Worm Gear Motors are made to generate high torque in a little package size. Worm Equipment Motors are excellent for applications that want a personal- locking or breaking feature since the result shaft can’t rotate when there’s no power used. Additionally, Worm Gearheads can transfer movement in 90 degrees. With various reduction ratios, precision cut gears, voltages and sizes, EP Products includes a DC Worm Equipment Motor solution for your application.
Features and Benefits
HIGH Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Ability to Handle Large Gear Decrease Ratios
High Durability
Low Noise
worm motor Flexible Configuration
Applications
Protection Door Locks / Industrial Conveying Systems / Security Gates / Dental Seats / Ambulance Cots & Stretchers Many of our DC Motors could be complimented with among our Worm Gearheads. EP Items will work with you to create and produce a Worm Gear Engine which will optimize the efficiency of your specific application.
Built to your specific requirements
Motor Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Cut / Round / Splined / Other)
Overall Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Additional Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm motor runs on the metal gear box for strength and a higher torque output. Because of the special mechanical framework of the worm drive the electric motor output shaft is self locking and can not be rotated.
This part uses a two wire connection and supports direction control as well as PWM speed control. Ranked voltage is 12v and can attain 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Rated Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear units from EP DRIVESYSTEMS especially show their strength in applications where high gear ratios are necessary. Our worm geared motors are consequently optimally suited for make use of in intralogistics, packaging technology and the meals & beverage industry.
Four great reasons for EP worm geared motors:
Rugged
Our worm geared motors have a high overload capacity
Maintenance Friendly
Washdown versions allow simple and efficient cleaning of the drive program.
Corrosion protection
The NSD tupH sealed surface area conversion is exceptionally chemical, corrosion and abrasion resistant.
Flexibility
Our modular style give users maximum freedom.
The modular system for optimum flexibility: Our EP worm gear units
There are numerous applications that require drive systems, and each of these has its own unique requirements. The EP series worm gear motors can be quickly and efficiently adapted to satisfy your needs.
Worm gear models impress with their high power density and small style. If required, we are able to also supply them with the impressive nsd tupH surface treatment.
In addition to the basic EP casing, you can expect an extensive type of bolt-on components to customize the product including torque arms, shaft covers and output flanges. These could be very easily field installed, but we may also be happy to assemble the average person components for you.
Discover more about our modular SI worm geared motors!
Find out more
Soft and Clean: The EP worm equipment unit SMI
SMI worm gear devices feature a soft, corrosion-resistant alluminum alloy housing. Optional nsd tupH surface conversion makes this product ideally suited for severe and demanding industries like food processing and pharmaceuticals.
Flexible input designs such as NEMA, IEC or immediate motor mounts in additional foot or flange mounted casing designs.
Worm geared motors
Worm geared motors for small power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared motor program. The units have got on all sides different fixing possibilities and enable an easy assembling for the client.
Additional drive configurationscan be designed by use of built-on components (e.g. torque arm and result flanges). The housings are made in light weight building out of aluminium die cast. Motor attachment is realised in general by way of IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:result shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm
Purchase Worm Drive Gearbox with Engine – incorporating the next features: 1 to 6V voltage rating, 17100 rpm simply no load velocity, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm wide, 40mm high, a robust worm drive gearbox powered by an MM28 engine (included), most suitable for applications where a simple to fit, high torque result is necessary, nylon housing and equipment, requires light essential oil or silicon grease lubrication, well suited for student based projects including robots and buggies.
Most suitable for applications where a simple to match, high torque result is required
Ideal for student based projects including robots and buggies
Reversible High torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
Reversible High torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Features:
The electric motor is Gear DC engine with micro-turbine worm, you can transform the wiring-connection to change motor rotation.
Turbo worm geared motor with self-lock, that is, regarding motor without electrical, the output axis is definitely fixed, self-lock.
The reducer output shaft arranged vertically with the engine shaft, whole engine output shaft relatively-short than general gear engine, widely used to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Result torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the screen, door, Mini winch. Ect.
In sumo robot or combat robot competition where high holding torque’s engine is essential to avoid your robot being pushed by your opponent robot. The worm equipment is certainly a better option when compared to spur gear motor. Why is worm gear so particular? Check this wiki out: Worm Drive.
“Unlike with ordinary gear trains, the direction of transmission (insight shaft vs output shaft) isn’t reversible when working with large reduction ratios, due to the better friction involved between your worm and worm-wheel, when usually an individual start (1 spiral) worm is used. This can be an advantage when it’s desired to eliminate any possibility of the result driving the input.”
In other words, it is tough to push your load (example, your robot) if the motor is not power or rotate.
Features and Spec:
Metal gear box
Result shaft is self-locking because of the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g