Small Precison Worm Reduction Gearboxes
There are many of specifications you will need to consider when making a worm gearbox selection.
First, what is the input and output torque requirements? Next, verify vendor horsepower/torque charts and select the correct worm equipment reducer.
If how big is the gearbox is going to be an important consideration then check the reducer dimension specs, not all producers make compact units. In fact, working with the proper supplier will help you not merely find the right equipment reducer but also avoid some of the most typical mistakes in reducer selection. We provide a free guide to help you find the right supplier to utilize.
For low and fractional horsepower app we offer two sizes of worm equipment reducer, the SW-1 and the SW-5. Size and torque output will be the major differences between these two models. Both feature the hollow or solid output shaft. Both versions are compact and provide users an array of ratios, including:
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Understanding the specifications of your particular application or project is essential to selecting the right worm gearbox.
Precision, 6:1 to 100:1 ratios, torque 1 to 10 Nm and multishaft arrangements
M1, M2, M3
Metric Worm Reduction Gearboxes
Small precision with multi-shaft arrangements
• 6:1 to 100:1
• Torque 1 to 10 Nm
• Drilled and tapped installation holes on top and bottom
• Flush fitting bearing caps simple to install
• Input shafts mounted on precision ball bearings
• Max. input speed 10000rpm
• Anti backlash version available
Additional Range:
Neckar Worm Gearboxes Type S – 4 sizes available
Smallest gearbox specifications:
• 5:1 to 60:1
• Output Torque: 1.4-2 Nm
• Aluminium housig
• Special steel worm wheel
• Max. load capability of output shaft 100N radial, 50N Axial
• Max. input speed 5,000 rpm
• Weight: 0.225kg
Where are Right Angle Worm Gear Motors Used
Anywhere a concise dual shaft gear motor or single shaft gear motor is required. This right angle gear motor is so versatile it can work just about anywhere.
Features & Options
Double Shaft or Solitary Shaft
Hollow Shaft
Maximize Torque in a little Package
Wide Gear Ratio
Cost-Effective
Compact Size
Specifications
Rated Torque: 55.3 – 700 g-cm
Rated Speed: 4710-5900 rpm
Rated Current: 240 – 5500 mA
Gear Ratios: 1:50 – 1:1050
Using miniature gears, Ever-Power has designed and built unique, high precision mini gearboxes that cannot be found somewhere else. Our miniature gearboxes can be found in several configurations, including worm and wheel, cross axis helical, bevel, inline spur, and more. We can also provide custom micro gearboxes that were created and created to meet your specific specifications.
Contact us for the mini gearbox your application requires, or request a quote on a custom micro gearbox.
Micro Gearbox Options
Gearboxes are also called reducers, gear reducers, quickness reducers, gear drives, and gearmotors. All terms can be used pretty much interchangeably. Please be aware that the links for our small gear drives include information on the full range of body sizes for that series or style.
Bevel Box Micro Equipment Drive
Our bevel package miniature equipment drives are application rated for the maximum balance of overall performance and cost. Torque can be balanced to meet up your RPM and operating life requirements. Lightweight with low backlash performance (as little as 1°, with choice of 1/2”).
Result torque: up to 7 oz.-inches
Low backlash: ≈1°, option of 1/2”
Rated for input speeds up to 2,000 RPM
Temperature range: -5° to 175°F (-20° to 79°C); optional to -40°F (-40°C)
Cross Axis Helical Miniature Gearbox
Ever-Power miniature cross axis helical gearboxes provide relatively high levels of thrust in a concise package. They provide an result shaft at 90° from the input, and are obtainable in gear small worm gearbox ratios from 1:1 to 40:1. Lightweight but durable, with machined aluminium housings and hardened alloy steel gears.
High efficiency: up to 88% at 1,000 RPM
Low backlash: as low as ≤30 arc minutes
Rated for input boosts to 4,000 RPM
“Left hand” models available
Miniature 2 Shaft Worm Gearbox
Our miniature 2 shaft worm gearmotors are engineered for ≤30 arc moments of backlash or better. Also called “shaft to bore gearboxes,” the unit provide a single input shaft that protrudes from reverse sides of the casing; output can be a keyed bore. Standard one- and double-end shafts are available and supplied with keys and retainer bands. An array of equipment ratios and insight sizes are available to meet your preferences.
High efficiency: up to 86% at 1,000 RPM
Low backlash: ≤30 arc minutes or better
Available in ratios from 5:1 to 120:1
Rated for input boosts to 3,000 RPM
Miniature 4 Shaft Worm Gearbox
Every miniature 4-shaft worm gearbox from Ever-Power features precision-machined hardened steel gears, solid aluminium housings, and long term lubrication. They offer two input shafts on opposing sides of the framework, with two output shafts perpendicular to the input shafts. Our mini 4 shaft worm gear drives deliver high effectiveness performance with low backlash.
High efficiency: up to 82% at 1,000 RPM
Low backlash: less than ≈2°
Available with gear ratios from 1:1 to 32:1
Rated for input boosts to 4,000 RPM
Miniature Flange Worm Gear Drive
These micro flange worm gearboxes generate an output at 90° from the input. They deliver superior overall performance in a wide variety applications and are built with little footprints, making them ideal for functions where space is bound. They offer high effectiveness with low backlash.
Gear ratios from 6.66:1 to 80:1
High efficiency: up to 83% at 1,000 RPM
Low backlash: as low as ≤4°
Max. input speed: 3,000 PRM
DC motor option available
Miniature Inline Spur Gearbox
Specifically engineered for encoder applications, Ever-Power’ micro inline spur gear drives are available in two frame sizes, and are rated for boosts to 3,000 RPM. Light weight aluminum housings and stainless steel gears and shafts make these inline spur gearboxes difficult and corrosion resistant, for your most demanding applications.
Result torque: up to 125 oz.-inches
Low backlash: as little as 15 arc minutes
Available with equipment ratios from 4.96:1 to 3600:1
Optional synchro cleats available
Compact Wormwheel Gearbox
These miniature right angle worm gear reducers deliver superior performance with high efficiency, and feature rugged construction for challenging power transfer operations. Available in three equipment ratios (5:1, 10:1, 20:1), our compact worm gearboxes are built in extremely compact footprints for applications where space is bound.
90° output angle
Gear ratios: 5:1, 10:1, and 20:1
Up to 12.5 inch-lbs. of output torque
Max. input speed: 3,000 RPM
Small footprint: 1.5” x 1.5” x 1.08”
Custom Miniature Gearbox
Ever-Power may engineer and manufacture a customized miniature gearbox to meet up your unique specs. We can produce custom micro gearboxes in any configuration your application requires, with result torque amounts as high as 900Nm. We can work from your gearbox designs, reverse engineer a preexisting unit, or help you develop an all-new design that provides the performance you need. Request a quote on a custom made miniature gearbox or contact us to discuss your specific requirements.
The Ever-Power Advantage: Little is No Big Problem
Broadest collection of small gear reducers
Greased for life
Ruggedly built
Modifications and particular ratios available
Custom small gearboxes made to suit
Input & Output Shafts
Input and output shafts with drive important and retainer rings can be supplied to your specifications for any of our hollow bore miniature gearboxes. We provide a basic selection of solitary ended or dual ended shafts to put together in these gearboxes. All gearbox shafts are supplied with keys and retainer rings.
For P and PF series worm and wheel gearboxes use our P/PF gearbox shafts.
For Electronic series crossed axis helical gearboxes use our Electronic gearbox shafts.
For F series spur gearboxes, contact our program engineers to go over your particular needs.
We provide a broad collection of misalignment shaft couplings in ” and metric bore sizes. Inch and metric precision floor shafts can be found from stock.
Contact Us for High Performance Miniature Gearboxes
We are the miniature gearbox professionals. All of our micro gear drive models deliver superior efficiency in a small footprint, and are durable enough for challenging work environments. Contact us to find out more about our mini gearboxes, or ask for a quote on a custom made model that’s tailored to your preferences.
Additional advantages of worm drive gearboxes include: