EP offers a full range of modular servo gearboxes /worm reducers. The modular design permits configurations with motor insight flange and output pinion for rack and pinion drives, along with solid outcome shafts, Hollow bore result, and insight shafts for all other positioning applications. The modular design and style allows for common mounting of the gearbox in virtually any orientation.
Servo-Worm Reducers were specifically developed for make use of with the most recent servo motors in applications that demand specific positioning and repeatability.
These reducers are suitable for applications in materials handling, automation, machine tool, and robotics.
The light weight modular aluminum housing design allows for easy machine integration, and excellent heat dissipation. A multitude of suggestions flanges and couplings can be found to allow easy mounting of practically any servo-motor and tailor made flanges could be accommodated. Output configurations with pinion, hollow bore, or solid shaft are available and may be configured for source with motor flange, no cost input shaft, or both free input shaft and motor flange.
An optimized worm equipment tooth design insures huge efficiency while at the same time decreasing backlash. Two degrees of backlash are available, Precise or Extra-specific, with backlash amounts to less than 3 arc minutes.
Obtainable in 6 sizes
Ratios from 2 to 60:1
Torque Ability up to 4400 Lb.-Ft. (6000 Nm)
Input Boosts to 6000 RPM
Two backlash amounts – Precise and Extra-precise.
Modular design compatible with rack & pinion system
4 input styles
7 output styles
28 possible standard configurations
Features
Wide range of servo gearboxes, designed to fit virtually all servo motors found on the market
Designed for the highest torsional stiffness and the lowest angular backlash, pertaining to the utmost torque and overhung loads
Bush with slot machines and hub clamp for servomotor coupling
Benefits
Enhanced dimensional compactness because of direct servomotor coupling
Widest range of feasible servomotors coupling dimensions.
The correct technical solution because of a comprehensive range of sizes, gear stages, transmission ratios, designs and non-standard designs.
High-Torque (HT) Servo-Worm Reducers
This standard selection of Servo-Worm Reducers are ideal for use in applications that demand high precise positioning, repeatability and performance. They were especially developed for work with with state-of-the-art servo engine technology, providing limited integration of the engine to the unit. Angular backlash of significantly less than 1 arc-minutes is provided standard.
They are available in four sizes (50 mm to 100 mm center range) with input speeds up to 5,000 rpm, reduction ratios from 4.75 to 52:1 and output torque capacities up to 885 lb.ft. A wide selection of motor couplings and mounting flanges are available for assembly to nearly all servo motors, and the hollow bore result works extremely well to mount end result shafts, pinion shafts, or other drive elements.
Usual applications for these reducers include precision rotary axis drives, traveling gantries & columns, materials handling axis drives, zero-backlash axis drives and electronic line shafting. Industries offered include Material H, ling, Aerospace, Automation, Machine Application and Robotics.
Gearing: Internal gear style was optimized to provide an angular backlash of significantly less than 1 arc-minutes in assembly, with the option of “in the discipline” adjustable backlash in the event that necessary.
Bearings: Input angular call bearings for high source speed, and robust productivity tapered-roller bearings for superior radial and axial load capability.
Housing: Aluminium housing for good heat dissipation, with integral type flange for servo motors and general mounting on any face.
Output: The outcome bore is available with a good compression-type hub or a ISO 9409-1 flange (see dimension pages). We give you a line of extras to adapt these outputs to right shafting, Rack & Pinions, or other gearing types.
This gearbox utilizes a 30:1 ratio worm-get reduction for applications that require extremely slow and smooth rotational motion. The worm-drive design not only minimizes backlash but as well eliminates back-driving the gearmotor so a posture can be kept even when power isn’t applied. The precision ground 3/8” stainless steel outcome shaft is reinforced by dual 3/8” ABEC 5 ball bearings to aid a load from any orientation. The ¼” ABS plastic and metal structure provides a rigid framework without adding pointless weight and is easily mounted to any flat surface by utilizing the base mounting tabs. Our Normal Spur Gear motors will work with this gearbox (motor offered separately). The Vertical Shaft Worm-Drive Gearbox is ideal for turn-tables, time-lapse devices and low-swiftness applications that require high precision and torque.
Motor RPM required = 1 / (a few minutes per rotation desired / 30)
Example: 1 / (10 minutes per rotation / 30) = 3 RPM motor needed to achieve ten minutes per rotation (at max speed)
now offers an economical right position gearhead for work with with small NEMA 23 through 56 and similar compact metric servo and stepper motors. These reducers are best suited for basic action and input speeds of 2000 rpm where profile software costs certainly are a major consideration.
7 sizes with torque capacities up to 684 Nm
12 exact single level ratios from 7:1 to 100:1
2 stage ratios available
Inch or metric output shafts
Hollow output standard, put in shafts optional
2D and 3D drawings obtainable online
Flexible servo motor interface
Clamp-design hub provides zero-backlash motor shaft connection
Aluminum diecast casing for low weight
Large end result bearings accommodate larger radial loads
Inch or metric hollow bore with keyway, solo and dual plug-in shafts also available
Double lip output seals provide maximal protection against contaminants
Face or base mounting choices, bolt on flanges and torque arms also available
Bronze wheels cast on the outcome shaft for higher strength
Hardened and surface worm shaft provides easy operation
Reducer completely sealed for common mounting and long-life lubrication
Two bearing worm support isolates electric motor bearings from radial and axial loads
Flexible coupling element eliminates electric motor misalignment and bearing wear
Worm Gears are right angle drives providing significant speed ratios on comparatively short center distances from 1/4” to 11”. When properly attached and lubricated they function as quietist and smoothest running type of gearing. Because of the high ratios likely with worm gearing, maximum speed reduction can be accomplished in much less space than a great many other types of gearing. Worm and worm gears are powered by non-intersecting shafts at 90° angles.
EFFICIENCY of worm gear drives depends to a huge degree on the helix position of the worm. Multiple thread worms and gears with higher helix angle prove 25% to 50% better than solitary thread worms. The mesh or engagement of worms with worm gears creates a sliding action leading to considerable friction and higher lack of efficiency beyond other styles of gearing. The usage of hardened and floor worm swith bronze worm gears raises efficiency.
LUBRICATION is an essential factor to improve efficiency in worm gearing. Worm gear action generates considerable heating, decreasing efficiency. The amount of ability transmitted at a given temperature rises as the efficiency of the gearing increases. Proper lubrication enhances effectiveness by reducing friction and heat.
RATIOS of worm equipment sets are determined by dividing the quantity of teeth in the gear by the number of threads. Thus single threads yield larger ratios than multiple threads. All EP. worm gear sets are available with either left or right palm threads. EP. worm gear sets are offered with Triple, Solitary, Qua and Double-druple Threads.
Security PROVISION: Worm gearing shouldn’t be used as a good locking mechanism to carry heavy weights where reversing action can cause harm or harm. In applications where potential injury is non-existent and self-locking is desired against backward rotation then use of an individual thread worm with a minimal helix angle instantly locks the worm equipment drive against backward rotation.
Materials recommended for worms is normally hardened steel and bronze for worm gears. Nevertheless, depending on the application form unhardened metal worms operate adequately and considerably more economically with cast iron worm gears at 50% horsepower ratings. Furthermore to steel and hardenedsteel, worms are available in stainless, bronze, aluminium and nylon; worm gears can be purchased in steel, hardened steel, stainless, lightweight aluminum, nylon and non-metallic (phenolic).
EP also sells gear tooth measuring equipment called GEAR GAGES! Gear Gages reduce mistakes, save money and time when identifying and ordering gears. These pitch templates can be found in nine sets to identify all the regular pitch sizes: Diametral Pitch “DP”, Circular Pitch “CP”, Exterior Involute Splines, Metric Module “MOD”, Stub Tooth, Good Pitches, Coarse Pitches and Uncommon Pitches. Refer to the section on Equipment GAGES for catalog quantities when ordering.

Did you locate just what you were seeking about Servo Worm Reducer? You can discover even more details on our site.