Equipment Boxes For Rotary Cutter’s, Shredders, and Choppers

Item description
RC thirty Collection Gearbox, 40hp Rated, 1-three/8″ SB input, 1-1/2″ X twelve Spline Output. 1:1.47 Ratio Change your broken rotary cutter gearbox with this substitution unit. Why rebuild when you can substitute at these kinds of a reduced cost? These gearboxes have been used by Worksaver, HawkLine, Global, WAC, Massive Bee, LMC, King Kutter, Midwest, Servis, Bush Hog, some Howse and a lot of far more. Observe: True Gearbox might have a rounded housing or sq. as shown, based on present availability, all interior areas are interchangeable and technical specs for the two boxes are similar! This gearbox attributes a 1:one.forty seven Speed Up equipment ratio for use on 5′ and more substantial diameter rotary cutters. Industry standard one-three/eight” easy diameter enter shaft with 1/2″ shear bolt gap and retaining ring groove and one.fifty seven” diameter twelve tapered spline output shaft enable fitment to most light, normal and medium responsibility rotary cutters. Each and every gearbox features high pace ball bearing models and heat treated gears and shafts to ensure lengthy existence. 4 bolt mounting matches business standards. Every gearbox involves blade provider mounting nut and cotter pin. Gearboxes are shipped dry and need sixteen ounces of 80-90W gearlube or equivalent. Disclaimer: Any and all Unique Gear Manufacturer’s (OEM) tradenames, logos, drawings, colors, descriptive information and part numbers are employed for areas identification needs only, and DN Tools, LLC (DN) is in no way implying that any distinct areas are OEM parts. Further, any use of the OEM’s tradenames, trademarks, drawings or part figures by DN is made only to assist DN’s clients, in obtaining the proper DN component or ingredient which will replace the OEM’s component.

rotary cutter gearbox