Power-Locks offer serious clamping durability from a keyless locking system. The precision made dual taper design as straightforward as it is powerful. Obtainable in bore sizes from 19 to 500mm, Power-Locks can attach any rotational component.

Disadvantage of ‘Poor In shape’:

The process of fixing the fit by machining the keyway in to the shaft is tedious, permanent and expensive.
It reduces the power and volume of torque a given shaft size can transmit.
Interference fits or perhaps welds prevent the operator from to be able to easily take away the shaft from the hub for repair or replacement.
Avoid pricey interruptions in your operation! has the answer for you… ’s Power-Locks! is a innovator within the power transmission industry in the quest to find a better method to connect elements to shafts.

Features:

Well-engineered, adjustable and inexpensive device that solves engineering and maintenance problems associated with other connection alternatives.
Shaft-to-hub friction connection that depends on concentric area pressure to affix gears, sprockets, and other drive components to a motor-driven shaft.
It helps to eliminate problems with keyway connections and limitation for QD and tapered bushings.
The frictional, keyless system permits transmission of high-torque and axial loads, and accommodate reversing, dynamic or shock loading.
Obtainable in both Inch and Metric sizes in a number of styles.
Advantages:

Permits easy attachment of shaft to hub without time and money spent on machining or perhaps extra assembly labour.
Provides solid connection between the hub and the shaft by using a keyless mechanical interference match to transmit torque or withstand axial thrust.
The pressure created through the mechanical interference expands the Power-Lock to eliminate the gap between your hub and the shaft; the friction bond between your Power-Lock and the shaft/hub produce a zero backlash interconnection.
Easy installation also allows the hub to become positioned more accurately upon the shaft, and can facilitate angular timing of the hub.
Power-Locks works extremely well in such common applications as the bond of timing pulleys, sheaves, conveyor pulleys, indexing applications, sprockets, gears, cams, levers, motors and hydraulics, clutches and brakes and flange couplings.
PowerLock connectors are plastic-type bodied one pole connectors for make use of in high electricity, low voltage applications. With current ratings of either 400amp or 660amp, the connectors are keyed to avoid connections with the incorrect line, and colour coded to meet various international 3 phase electrical standards. Body types consist of those for panel installation or for fitting to a wide range of copper cables up to 300mm². A selection of extras and network connection products are available to enhance the range.
Power Lock exterior locking mechanisms are easy to use-even in low temperatures and when wearing gloves
in. foam hold and a broad, padded wrist loop be sure a cozy and secure carry; cork knob unscrews to make a monopod camera mount
Small-diameter trekking basket helps maintain the carbide tip from sinking into soft dirt and sand
3-section shaft Power Lock extends to 55 in. and collapses to 27 in.
The PowerLock is a light, money-saving air valve that reduces energy use by protecting against airflow between vehicles and minimizing peak load charges. It reduces noise amounts, and when equipped with automatic-sensing technology, it can either delay or eliminate drying for pick-up beds or soft-leading convertibles. The PowerLock air valve car wash electric power saver puts additional money back in your pocket while creating a quieter and safer environment in your tunnel.