Single and dual reduction planetary equipment drives to be utilized with electric, hydraulic, air motors or mechanical power insight from high velocity, low torque sources to deliver decreased speeds at increased torques. The input side has standard SAE pads for motor mounting. Available in the three result configurations proven below. Many units can be furnished with an intrinsic parking brake.
One reduction drives are limited to 3500 RPM input; dual reduction drives to 5000 RPM. Units with integral parking input swiftness is limited to 2500 RPM.The same torque is available in either direction of rotation. Torque Plastic Gear Rack ratings are intermittent. For continuous operation reduce torque rankings to about 1/3 to 1/2 the values shown. Models provide 95% power transmission efficiency.

Wheel Drive
Input side has regular SAE pads and splined insight. Output aspect has hub for mounting vehicle wheel. Free wheel can be done by using the spring disconnect to disengage the drive shaft. The disengage feature is usually regular on all wheel drives.

Shaft Output
Input side regular SAE pads with splined insight. Output side options include: Keyed round, hexed, hollow, tapered or splined shaft.

Spindle Drive
Input side is regular SAE pads with splined insight. Output side has a flanged spindle for coupling to the load.

Swing Drives
Ever-Power model 6 is offered with or without essential parking brakes. The “SW” Power Wheel has extra-large tapered roller bearings, a ductile iron hub and warmth treated ring equipment to minimize backlash growth due to wear. The external bearing nut supplies the best in shaft retention and shaft power. Output could be a spindle shaft or various sizes of essential pinion gears.