Common Description
Outfitted with all the zero leak bidirectional checking sole-noid valves, this electrical power unit is developed for the operation of two independent circuits. Which are respectively to the key and subordinate platforms in the double scissors lift. Two cut-off valves are employed for decreasing the machine manually in case of electrical power loss. If much more independent circuits are needed for your application please get in touch with us for availability.
Remark: 1. Please seek the advice of our revenue engineer to the various pump displacement, motor power or tank capability.
2. CSA or UL certified motors are available on request.
Unique Notes
one. The AC motor is of S3 duty cycle, which could only perform intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
2. Clean every one of the hydraulic elements concerned prior to set up of the electrical power unit.
3. Viscosity in the oil shoud be 15~46 cst,and the oil should be clean and cost-free of impurities,N46 hydraulic oil is encouraged.
4. The energy unit should really be mounted vertically.
five. Check the oil level inside the tank soon after the preliminary operating from the energy unit.
six. Oil transforming is needed just after the original a hundred operation hours,afterwards when each and every 3000 hrs.