Worm drive gearbox with motor
worm motor
A robust worm-travel gearbox powered by an MM28 electric motor. Ideal applications where an easy to fit, high torque end result is required. Ideal for student based jobs including robots and buggies.
The machine has been designed so that the output shaft can be ‘clicked’ in and out for modification. Electronic.g. cutting down to size. The engine is snap installed into its cradle to engage the apparatus and worm.
Details
1 – 6V DC
0.1A to 1A based on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
General dimensions of box + engine: 35(W) x 40(H) x 60(L)mm
The primary feature of the high-efficiency gear box is a worm gear, which locks the output shaft whenever the motor is not turning. The high equipment ratios of 216:1 or 336:1 get this to gearbox appropriate for small strolling robots, lifting mechanisms, and various other applications where excessive torque is desired.
The low-voltage motors in the worm gearbox run on 1.5-4.5 volts and draw up to some amps, making them perfect applicants for the DRV8833 motor driver carrier. Engine overheating can be due to excessive stalling, actually at suprisingly low voltages. We advise that you utilize stall-detection sensors, or simply look at your robot, to make sure that it doesn’t stall for more than a few seconds at the same time.
This gearbox includes a 4 mm diameter, round output shaft, which works together with the wheels that are compatible with Tamiya 4 mm, round shafts. Our 3 mm universal installation hub also suits on the smaller threaded end of the shaft, although it is not especially designed to work with this type of shaft (the hub’s set screw could damage the thread on the shaft).
Ever-Power gear motors are economical, right-angle, worm-geared motors that install easily found in the tightest applications. Economical correct position worm geared motors arranged new specifications for reliability, effectiveness and economic climate with unparalleled features which includes hollow shafts in the smallest sizes. An inverter friendly style offers easy integration at this point and a future proof option. The Ever-Power gear engine offers total versatility in mounting choices includes shaft, base, face, and flange solutions. The electric motor terminal box could be mounted in choice positions rotated in 90º steps around the electric motor frame offering for unparalleled integration opportunities.
Ever-Power gear motors comply with UNITED STATES and International specifications, including NEMA, IEC, CSA, and CE, the Ever-Power series allows for worldwide acceptance, a true total alternative for our global customers.
Superior protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dirt tight and hose proof,and can be utilized outdoors or in wet and dusty conditions without the use of additional enclosures. Complete rated output is offered by the result shaft of the machine.
Product Features
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change initial after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Additional features:
Connecting with Plug connectors.
With integrated inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to EN 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm gear motors are the answer for applications requiring a part turn, optional dual output, or an inability for the engine to be back again driven. The DC right angle gear motors are created for continuous and intermittent duty operation. Our right angle equipment reducers were created with many mounting plate options, making them well suited for a number of DC electric motor based applications. We offer 12 ratios which range from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Regular brush life of 2000+ time (varies by application)
EP Products Worm Equipment Motors are created to generate high torque in a little package size. Worm Gear Motors are excellent for applications that require a self- locking or breaking feature since the result shaft can’t rotate when there’s no power applied. Additionally, Worm Gearheads can transfer movement in 90 degrees. With various reduction ratios, precision slice gears, voltages and sizes, EP Products has a DC Worm Equipment Motor solution for the application.
Features and Benefits
Very High Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Ability to Handle Large Equipment Reduction Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Protection Door Locks / Industrial Conveying Devices / Security Gates / Teeth Chair / Ambulance Cots & Stretchers Quite a few DC Motors can be complimented with one of our Worm Gearheads. EP Items will continue to work with you to design and manufacture a Worm Gear Engine that will optimize the overall performance of your unique application.
Built to your unique requirements
Electric motor Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Slash / Round / Splined / Other)
Overall Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Extra Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm engine runs on the metal gear box for strength and a higher torque output. Due to the special mechanical framework of the worm drive the engine output shaft can be self locking and will not be rotated.
This part uses a two wire connection and supports direction control as well as PWM speed control. Rated voltage is 12v and will achieve 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Rated Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear units from EP DRIVESYSTEMS especially display their strength in applications where great gear ratios are essential. Our worm geared motors happen to be therefore optimally suited for use in intralogistics, packaging technology and the food & beverage industry.
Four great reasons for EP worm geared motors:
Rugged
Our worm geared motors have a higher overload capacity
Maintenance Friendly
Washdown versions allow simple and effective cleaning of the travel system.
Corrosion protection
The NSD tupH sealed surface conversion is exceptionally chemical, corrosion and abrasion resistant.
Flexibility
Our modular style give users maximum freedom.
The modular system for maximum flexibility: Our EP worm gear units
There are numerous applications that want drive systems, and each of these has its own unique requirements. The EP series worm gear motors could be quickly and efficiently adapted to satisfy your needs.
Worm gear products impress with their large power density and small design. If required, we can also supply them with the impressive nsd tupH surface treatment.
In addition to the basic EP housing, you can expect an extensive line of bolt-on elements to customize the product including torque arms, shaft addresses and output flanges. These could be easily field set up, but we may also be glad to assemble the individual components for you.
Discover more about the modular SI worm geared motors!
Find out more
Smooth and Tidy: The EP worm gear unit SMI
SMI worm gear units feature a simple, corrosion-resistant alluminum alloy casing. Optional nsd tupH surface conversion makes the product preferably suited for harsh and challenging industries like food processing and pharmaceuticals.
Versatile input designs such as for example NEMA, IEC or immediate motor mounts in extra foot or flange mounted housing designs.
Worm geared motors
Worm geared motors for small power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared engine program. The units have got on all sides diverse fixing possibilities and enable a simple assembling for the client.
Additional drive configurationscan be designed by use of built-in accessories (e.g. torque arm and output flanges). The housings are created in light weight building out of aluminium die cast. Engine attachment is realised generally by way of IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:result shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm
Buy Worm Travel Gearbox with Engine – incorporating the following features: 1 to 6V voltage rating, 17100 rpm simply no load swiftness, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm vast, 40mm high, a good robust worm travel gearbox powered by an MM28 motor (included), most suitable for applications where a simple to fit, high torque outcome is required, nylon housing and equipment, requires light oil or perhaps silicon grease lubrication, well suited for student based tasks including robots and buggies.
Most ideal for applications where a simple to match, high torque output is required
Ideal for student based tasks including robots and buggies
Reversible Huge torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Reversible High torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
Features:
The engine is Gear DC motor with micro-turbine worm, you can change the wiring-connection to improve motor rotation.
Turbo worm geared electric motor with self-lock, that is, in the case of motor without electric, the outcome axis can be fixed, self-lock.
The reducer output shaft arranged vertically with the engine shaft, whole engine output shaft relatively-short than general gear electric motor, widely used to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Result torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the home window, door, Mini winch. Ect.
In sumo robot or combat robot competition where high holding torque’s engine is essential in order to avoid your robot being pushed by your opponent robot. The worm equipment is definitely a much better option when compared to spur gear motor. How come worm gear so particular? Take a look wiki out: Worm Drive.
“Unlike with ordinary gear trains, the path of transmission (insight shaft vs result shaft) isn’t reversible when working with large reduction ratios, because of the greater friction involved between your worm and worm-wheel, when usually an individual start (1 spiral) worm is used. This can often be a advantage when it is desired to get rid of any likelihood of the output driving the input.”
In other phrases, it is hard to push your load (example, your robot) if the motor isn’t power or rotate.
Features and Spec:
Metal gear box
Result shaft is self-locking because of the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g

Our worm motor is the best and most cutting-edge out there.