one.A connecting link of an O-ring Chain for standard application is pre-coated with grease at the pins. In advance of connection, confirm the grease about the surfaces of pins, and if the quantity of grease is small, apply grease with bare hands. (If gloves are employed, the grease will likely be absorbed through the gloves.)
Example: Once the connecting hyperlink (I) of an O-ring chain for basic application is
shipped, O-rings are fitted with the roots of the pins. In the event the O-rings come loose resulting from vibration for the duration of transport, refit the O-rings in on the roots from the pins.
In this case, be sure you return the grease collected on the roots from the pins on the central surfaces with the pins, extra at portion A than at portions B proven inside the over illustration. (Portions A is worn as a result of sliding with all the bushings.)
two.The chain can be most effortlessly connected over the teeth of a sprocket. Engage the links at each ends on the chain with all the sprocket teeth and fit connecting pins. Should the sprocket may be moved, the chain can also be linked within the loosened side.
3. Connecting method
1.Confirm that O-rings are connected on the roots in the pins.
two.If the amount of grease utilized to the connecting pins is small, coat the pins with grease on the central portions.
three.Insert the connecting pins in to the bushings of the inner hyperlinks at the two ends.
4.Verify that the grease is utilized for the total encounter with the O-ring, and match the O-ring onto the connecting pins.
five.Insert the connecting pins into the connecting plate and although pressing the connecting plate, set up the spring clip. Verify irrespective of whether the head (the end with no split) in the spring clip is turned during the feeding direction on the chain. (See the next illustration.)
6.Make sure to confirm the spring clip is securely fitted while in the clip grooves on the connecting pins.
This completes jointing on the connecting website link. Note that grease within the surfaces of connecting pins and O-rings might be eliminated all through installation perform. In this instance, re-grease employing the grease about the surface in the base chain or even the grease while in the polyethylene bag in which the connecting link was contained.