Consisting of the stress balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this energy unit is intended to operate materials dealing with gear. The lowering motion is achived from the solenoid valve together with the lowering pace controlled by an adjustable needle valve. The left and proper functions are equipped having a dual pilot operated check out valve and cross-over relief valves.
Remark: Please seek advice from our revenue engineer for your unique pump displacement, motor energy or tank capacity.
one. This power unit is of S3 duty cycle, i.e.,non-continuous operation,30 seconds on and 270 seconds off.
2. Clean all of the hydraulic elements concerned in advance of installation of the power unit.
3. Viscosity from the hydraulic oil shoud be 15~46 cst, which should really also be clean and free of impurities.N46 hydraulic oil is advisable.
four. This power unit ought to be mounted horizontal.
five. Check the oil degree from the tank immediately after the primary start out on the energy unit.
six. Oil changing is required right after the first a hundred operation hrs, afterwards after every 3000 hours.