Hanging Pulleys meant for Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as for example block and deal with systems. They require about half the power of a single-groove pulley to go the same load.
Pulleys with a bearing are easier to convert than pulleys with out a bearing.
Acetal, nylon, and light weight aluminum are lightweight and corrosion resistant. Stainless steel may be the most corrosion resistant.
Styles C, D, and J possess a bracket on underneath for tying off one end of a rope.
Style K decrease the force needed to hold your load set up. Unlike standard pulleys, these possess a V-groove for more grasp on your rope, plus they ratchet when under load so they don’t slip in the other direction. Pulley for3/8″ dia. rope could be set to ratchet even when not under load.
Mounted Pulleys for Rope-For Horizontal Pulling
Mount these pulleys to a flat surface to aid with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Light weight aluminum and nylon are light-weight and corrosion resistant. Stainless steel has the most corrosion resistance.
Pulleys for Rope-For Horizontal Pulling
Also referred to as sheaves, use these pulleys to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are simpler to change than pulleys without a bearing.
Acetal and light weight aluminum are light-weight and corrosion resistant. Galvanized metal is certainly more corrosion resistant than iron and metal. Stainless steel may be the most corrosion resistant.
Easy-Open up Hanging Pulleys for Rope-For Horizontal Pulling
Also known as snatch blocks, these pulleys open so it is simpler to feed the rope through the housing-a free rope end isn’t needed. Use them to aid with horizontal pulling or even to guide a rope.
Pulleys with a bearing are easier to convert than pulleys without a bearing.
Aluminum is more lightweight than stainless steel. Stainless steel is certainly more corrosion resistant than aluminum.
Pulleys for Wire Rope-For Horizontal Pulling
Also known as sheaves, use these pulleys to aid with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to convert than pulleys with out a bearing.
Acetal and nylon are light-weight and corrosion resistant. Stainless is the most corrosion resistant.
Mounted Pulleys for Wire Rope-For Horizontal Pulling
Attach these pulleys to a set surface to assist with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move an individual load, such as for example block and tackle systems. They require about 50 % the drive of a single-groove pulley to go the same load.
Pulleys with a bearing are easier to turn than pulleys with out a bearing.
Stainless steel is usually more corrosion resistant than steel.
Hanging Pulleys to get Wire Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to aid with horizontal pulling or to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move a single load, such as block and tackle systems. They require about 50 % the power of a single-groove pulley to move the same load. They have got a bracket on the bottom for tying off one end of your wire rope.
Pulleys with a bearing are simpler to change than pulleys without a bearing.
Nylon is much lighter than metal. Aluminum is certainly corrosion resistant. Stainless is the most corrosion resistant.
Pulley with carabiner can mount to steel framing or hang as part of your rigging system.
Easy-Open Hanging Pulleys for Wire Rope-For Horizontal Pulling
Also known as snatch blocks, these pulleys open therefore it’s easier to feed the rope through the housing-a totally free rope end is not needed. Use them to aid with horizontal pulling or to guide a rope.
Style D pulleys have a corrosion-resistant stainless steel housing.
Pulleys for Wire Rope-For Lifting
Use the bore to attach these pulleys on a shaft. These pulleys are also known as sheaves.
Pulleys with a bearing are simpler to change than pulleys without a bearing.
Nylon pulleys are lighter in weight than steel pulleys.
Warning: Never make use of to lift people or items over people.
Mounted Pulleys for Wire Rope-For Lifting
Mount these pulleys to a flat surface.
Pulleys with two grooves are for make use of in applications where multiple pulleys move a single load, such as block and tackle systems.They are able to reduce the force needed to move the strain by up to 2 times compared to single-groove pulleys.
Pulleys with a bearing are simpler to turn than pulleys with out a bearing.
Stainless steel pulleys are more corrosion resistant that steel.
Style 3 pivots up to 200° for different pull directions.
Warning: Never make use of to lift people or items over people.
Hanging Pulleys intended for Wire Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as block and deal with systems. They require about half the power of a single-groove pulley to go the same load.
Pulleys with a bearing are simpler to turn than pulleys without a bearing.
Style E pulleys have bracket upon the bottom that enables you to tie off a single end of your wire rope.
Warning: Never use to lift people or items over people.
Easy-Open up Hanging Pulleys for Wire Rope-For Lifting
Also referred to as snatch blocks, these pulleys open so it’seasier to feed the rope through the housing-a totally free rope end is not needed.
Pulleys with two grooves are for make use of where multiple pulleys move an individual load, such as block and deal with systems. They require about 50 % the push of a single-groove pulley to go the same load.
Latch kits (sold separately) add a latch to the swiveling hook on Style C to keep rope secure.
Warning: Never make use of to lift people or items over people
Hanging Pulleys for Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are used in applications where multiple pulleys move an individual load, such as for example block and tackle systems. They are able to reduce the force needed to move the load by up to 2 times compared to single-groove pulleys.
Pulleys with a bearing are easier to convert than pulleys without a bearing.
Style A pulleys have a bracket on underneath for tying off a single end of a rope.
Warning: Never use to lift people or products over people.
Easy-Open Hanging Pulleys for Rope-For Lifting
Also known as snatch blocks, these pulleys open so it is easier to feed the rope through the housing-a free rope end isn’t needed.
Warning: Never use to lift people or products over people.