We are committed to research and creation of products that meet the increasingly sophisticated electronics industry and are trusted in computers, home appliances, consumer electronics, communications, info, industry, medical and various other fields.
We also has patent for 360 level AC PIN interchangeable type adaptor in fact it is leading the world’s distinctive design.

Ever-Power provides products which are scaled-down, lighter, more electric power efficient, and better to use.
We selling products all over the world and obtain the certifications for each of country. And also acquired ISO9001:2015 and ISO 14001:2015 etc. to ensure products meet the latest Pto Adapter china regulations.
Gear adapters install between the vehicle tranny and power take-off, and can serve several purposes. Mostly, adapters are applied to change the way of rotation of the PTO productivity shaft. They can also be employed to space the PTO out and away from the transmission case. On some imported or non-SAE common transmissions they enable the mounting of typical 6-bolt power take-offs. Gear Adapters are available to fit most popular transmissions.
Several body configurations: Can relocate the PTO output shaft to improve clearance for a driveshaft or direct-coupled pump
Adjustments PTO shaft rotation: Suits PTO rotation to that of the driven equipment
Standard and non-standard bolt patterns: Suits SAE common PTOs to nonstandard transmissions

• Frame made of 1/4″, 3′ x 3″ and 1/4″, 2″ x 2″ steel tubing
• Operates off of skid steer hydraulics
• Requires a minimum of 16 GPM; maximum of 22 GPM (produces 20 to 40 HP from the power take off)
• No need to modify electrical power take off shafts
• Adjustable lower arms
• Reinforced durable universal mounting brackets
• Complete with engine, hydraulic hoses and flat faced couplers
• Ideal for three point ability take off gear – snow blowers, mowers, tillers, post hole augers, etc

: Over-running clutches provide a safe methods to protect operators and costly machinery from conditions when the inertia of PTO powered implement exceeds and over-runs the tractor PTO rate. In such a case, the over-working coupler will free-wheel
smoothly and properly. Over-running clutches will normally endure applications requiring up to 65 h.p. at 540 rpm and 100 h.p. at
1000 rpm. Severe shock loads or travel line angularity will certainly reduce this capability
If the space of your PTO does not fit perfectly within a tractor, a PTO adapter can extend the size without having to replace it for a fresh one. This adapter comes with an overall amount of 7-3/16″ with a male end 1-3/8″ x 6 spline and a female 1-3/8″ x 6 spline end.
Create additional length on the end of your PTO. This tractor PTO shaft adapter has both a lady 6 spline end and a man 6 spline end, each end has a diameter of 1-3/8 in. This allows more connection alternatives and is suitable for anyone that owns an older tractor since the older parts may not be produced any more and are less common.
The over-running coupler can be an essential part of PTO travel on rotary mowers, bailers, hay conditioners or any implement where inertia of driven unit could be required to over-run driving source. The coupler drives solidly from tractor to put into practice and free wheels efficiently when implement exceeds tractor PTO speeds. All dimensions are nominal.
Converts a 1 1/8″ keyed spline to a 1 3/8″ 6 spline.
Needed with 1000 RPM gearcase upgrade or Three Point Hitch kit for the 25PTOC.
This Small 1000 (21 Spline) to 540 PTO Adapter is the perfect meet for your Shop Dog. It really is conveniently carried in the Store Dog’s hitchpin and PTO adapter carriers.
This is also a good PTO adapter for tractor use. This adapter decreases the tractor’s PTO from 1-3/8″ x 21 spline to 1-3/8 6 spline (540) and extends the PTO shaft 4-1/8″. It comes with an overall length of 6-3/8″ and is ranked for tractors up to 70 HP.