This power unit functions a everlasting magnet motor using a electrical power up gravity down circuit. Activate the begin solenoid to start out the motor to lift the machine. The lowing movement is activated through the solenoid valve using the decreasing pace controlled by the stress compensated flow handle valve. Solutions of this series can be widely used in the market of logistic products this kind of as fork lift, mini lift table, and so on.
1. This power unit is of S3 duty cycle, i.e.,non-continuous operation, thirty seconds on and 270 seconds off.
two. Clean each of the hydraulic components concerned before installation of the power unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst, which should really also be clean and free of impurities. N46 hydraulic oil is advised.
four. This electrical power unit is made to be mounted vertically.
5. Check the oil level during the tank right after the 1st star on the energy unit.
6. Oil transforming is required after the original 100 operation hours,afterwards once every 3000 hrs.
seven. More pump sizes and tank sizes are avaiable upon request.