The EP Greenhouse reducer is a concise and lightweight reduction gear motor with a built-in limit switch system that’s ideal for assembly of a locally available electric engine. The geared motor is used in manually-managed or climate-controlled ventilation and display systems in greenhouses. The quick and easy-to-install EP geared motor is definitely rainproof and windproof. The gear driver has a high protection course (IP65) and can be utilized within an ambient temperature of 0-60 °C.
The low-noise geared motor for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminum precision housing. The self-braking worm wheel transmission ensures that the drive shaft is definitely locked when the reduction gear reducer isn’t running. The completely sealed reduction gearbox has an growth chamber with a diaphragm to keep the gear essential oil at a low pressure under all conditions, even at high temperatures. Thanks to the usage of an growth chamber, the reducer could be installed in any position. There are no restrictions, because there is no need for a bleed plug. The sealed reduction gear driver keeps the apparatus essential oil of the gearbox in optimum condition because of its entire operating lifetime. The geared motor is suitable for discontinuous use, working class s3-30%, with a maximum activation time of 25 minutes.
The Gear box reduction gear reducer has an FT85 motor assembly flange, on to which a suitable IEC standard motor can simply be installed (EN 50347).
The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit switch system is installed within an integrated chamber and is enclosed by an impact-resistant plastic-type material cover. The limit change system is accessible and simple to adjust. The limit change system’s maximum switching range can be 40 or 64 revolutions of the drive shaft. The cabling is connected in spring-clip connections. The gear driver comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The gearbox for greenhouse comes with 
16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates are available as accessories.
Maximum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in case of software of 4-pole electric motor.
Protection class IP65.
May be used in ambient temperatures of 0-60°C.
Ideal for discontinuous use, operating class s3-30%, optimum activation time 25 mins.
Equipped as regular with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC standard motor (EN 50347).
Maximum switching selection of limit switch program 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).