DUMP TRAILER Energy UNIT- SINGLE ACTING
This electrical power unit features a electrical power up gravity down circuit. Begin the motor to extend the cylinder and activate the solenoid valve to retract the circuit. Guide override to solenoid valve is usually provided if expected. Also a pressure compen sated movement control could be extra for the circuit to manage the descent pace of your cylinder.
Remark: Please check with our sales engineer to the distinctive pump displacement, motor power or tank capability.
one. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean all the hydraulic elements concerned just before installation of the power unit.
three. Viscosity of your hydraulic oil shoud be 15~46 cst,which ought to also be clean and free of charge of impurities.N46 hydraulic oil is suggested.
four. The electrical power unit really should be mounted horizontally.
five. Check the oil degree while in the tank soon after the original running on the energy unit.
six. Oil shifting is needed soon after the initial one hundred operation hours, afterwards as soon as just about every 3000 hrs.
DUMP TRAILER Power UNIT-DOUBLE ACTING
This electrical power unit includes a electrical power up power down circuit with load holding on each A & B ports. A stress compensatred flow handle can be extra to circuit to regulate the decent speed from the cylinder.
1. This power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
two. Clean all the hydraulic elements concerned before set up of the energy unit.
three. Viscosity of your hydraulic oil shoud be 15~46 cst, which must also be clean and free of impurities. N46 hydraulic oil is advised.
4. The power unit really should be mounted horizontally.
5. Check the oil level within the tank soon after the first running in the electrical power unit.
six. Oil shifting is needed following the first a hundred operation hrs, afterwards the moment each 3000 hours.