Our disc packs are produced employing substantial grade stainless steel
(AISI-301), making sure higher power, higher endurance to fatigue, and resistance to most environmental conditions.
Disc couplings utilize unitized disc packs with both six or eight bolt styles. The 8 bolt style can transmit better torque compared to the 6 bolt design, on the other hand, it’s not in a position to accommodate as significantly angular misalignment.
Couplings may be fitted with overload bushings to safeguard the disc pack during momentary torsional overloads.
Couplings are offered in a variety of configurations to match most applications. Also, ?¡¥s engineering division can customize a coupling to meet several specific demands this kind of as close coupled, drop-out centers, electrically insulated, vertical mounting, and safety couplings. A notable style and design supplied by could be the lowered moment (DI Style) coupling that meets the anti-flail gadget needs mandated in API-610 though giving a reduced weight and quick center of gravity to bearing distance.
The design and manufacture of disc couplings is integrated right into a licensed Quality Method in accordance to ISO-9001 to fulfill the high top quality requirements of buyers.
Pros in the Disc Coupling
Eliminates the have to have for lubrication and coupling maintenance
Coupling is usually inspected with out disassembly
Condition of disc packs is usually inspected using a strobe light while the machine is running
Note: It really is not advised that couplings be operated with no coupling guards.
Easy to assess products misalignment
Torsionally rigid with out any backlash
No wearing components
\Resistance to harsh environments
Long existence when properly sized and aligned
High electrical power density (greater torque to get a given outside diameter)
Supports the API-610 Common as much as three,800 RPM
Unitized disc packs make sure repeatability necessary for meeting the balance and piloting requirements as mandated by API-610
Available with Overload Bushings to safeguard the coupling from momentary torque overloads
Prevents the disc pack from being plastically deformed
Allows for shorter BSE (shaft separation) because bolts could be turned to encounter inward
Special orientation of bolts will allow the bolts to become tightened using a torque wrench instead of nuts (Ordinary is always to tighten nuts with torque wrench)